NORSAFE / INDUSTRY SAFETY REFERENCES
Mining & Quarrying Safety Requirements in South Africa
South African legislation · employer duties · task-specific protection · official sources
On this page Open the contents
Government Legislation, Mine Health and Safety Regulations, PPE Standards and Workplace Compliance
Mining and quarrying are among South Africa's most heavily regulated industrial activities. Underground mines, opencast mines, surface quarries, aggregate processing plants and mineral extraction operations must implement appropriate measures to protect employees, contractors, visitors and surrounding communities.
The Mine Health and Safety Act 29 of 1996 establishes the primary legal duties of mine employers and employees. Supporting regulations and mandatory Codes of Practice (COPs) address specific risks associated with mining equipment, explosives, occupational hygiene, ground stability, fire, emergency response and personal protective equipment.
This guide provides mine operators, quarry managers, safety officers, contractors and procurement departments with a structured reference to applicable requirements.
1. South African Mining Health and Safety Legislation
Mine Health and Safety Act 29 of 1996
The Mine Health and Safety Act (MHSA) is the principal legislation governing the protection of employees and other persons at South African mines.
Important statutory provisions include:
Section | Legal requirement |
Section 2 | Employer responsibility for the safe design, operation, maintenance and closure of mines |
Section 5 | Maintaining a working environment that is safe and without risk to employees' health |
Section 6 | Supplying necessary health and safety equipment and PPE |
Section 7 | Ensuring a suitable organisational structure and appropriate appointments |
Section 9 | Preparing and implementing required Codes of Practice |
Section 10 | Providing appropriate employee health and safety training |
Section 11 | Identifying hazards, assessing risks and implementing measures to eliminate, control or minimise risks |
Section 12 | Occupational hygiene measurements and monitoring |
Section 13 | Medical surveillance systems for employees exposed to relevant health risks |
Section 22 | Employee duties concerning health and safety |
Section 23 | Employees' right to leave dangerous workplaces |
Section 24 | Prohibition on charging employees for required health and safety facilities and equipment |
Section 54 | Mine inspector powers concerning dangerous conditions and practices |
Mine Health and Safety Regulations
The regulations are organised into subject-specific chapters covering mine management, electrical and mechanical equipment, explosives, occupational hygiene, mine environmental conditions, rescue arrangements and other operational requirements.
Particularly relevant chapters include:
- Chapter 4: Explosives.
- Chapter 8: Machinery and equipment, including conveyors, trackless mobile machinery, shafts and winders.
- Chapter 9: Occupational hygiene.
- Chapter 16: Rescue, first aid, emergency preparedness and response.
- Chapter 17: Surveying, mapping and mine plans.
- Chapter 22: Definitions, competency requirements and occupational exposure schedules.
Mineral and Petroleum Resources Development Act 28 of 2002
The Mineral and Petroleum Resources Development Act (MPRDA) regulates mineral rights, mining authorisations and associated mineral resource activities.
It is particularly relevant to the legal authorisation of quarrying, prospecting, mining and mineral extraction.
Authorisation to conduct mining activities does not replace compliance with the Mine Health and Safety Act.
Environmental and Related Legislation
Depending on the operation, other legal requirements may include:
- National Environmental Management Act 107 of 1998.
- National Environmental Management: Waste Act 59 of 2008.
- National Water Act 36 of 1998.
- National Environmental Management: Air Quality Act 39 of 2004.
- Occupational Diseases in Mines and Works Act 78 of 1973.
- Compensation for Occupational Injuries and Diseases Act 130 of 1993.
- National Road Traffic Act 93 of 1996, where applicable to vehicles using public roads.
Environmental authorisations, mine closure responsibilities, water-use requirements and mining health and safety duties must be assessed separately.
2. Mining and Quarrying Operations Covered
The MHSA's definition of a mine includes places where minerals are extracted or processed and associated structures, machinery and facilities.
Relevant operations may include:
Mining operation | Typical activities and hazards |
Underground hard-rock mining | Rock falls, seismic activity, dust, heat, machinery and ventilation hazards |
Underground coal mining | Coal dust, combustible gases, fires, explosions and ground instability |
Opencast mining | Pit slope stability, drilling, blasting, haul roads and large mobile machinery |
Stone and aggregate quarrying | Rock extraction, blasting, crushing, screening, dust and falling material |
Sand and gravel extraction | Excavation instability, mobile equipment, stockpiles and water hazards |
Mineral processing plants | Conveyors, crushers, chemicals, dust, noise and mechanical equipment |
Mine workshops and maintenance | Welding, cutting, lifting, electrical work and stored energy |
Tailings and mine residue operations | Embankment stability, process chemicals, dust and water management |
The exact legal duties depend on the activities and facilities involved. Some specialist requirements apply only to specific mine categories, such as underground coal operations or mines operating winding installations.
3. Employer Responsibilities and Mine Safety Management
Hazard Identification and Risk Assessment — Section 11
Mine employers must identify hazards, assess their associated risks and record the significant hazards identified.
Risk control must prioritise:
- Eliminating the hazard where reasonably practicable.
- Controlling the hazard at its source.
- Minimising remaining risks through appropriate work systems.
- Providing suitable personal protective equipment for residual risks.
- Monitoring the effectiveness of control measures.
Assessments must consider activities, machinery, equipment, environmental conditions and the persons potentially exposed.
Mandatory Codes of Practice — Section 9
Mine employers must prepare and implement Codes of Practice when required by the Chief Inspector of Mines.
Mandatory COP requirements may apply to matters including:
- Trackless mobile machinery.
- Road and rail safety management.
- Conveyor installations.
- Occupational exposure to airborne pollutants.
- Noise exposure and medical surveillance.
- Thermal stress.
- Fatigue management.
- Working in confined spaces.
- Mine fires and explosions.
- Ground stability and fall-of-ground prevention.
- Emergency preparedness and response.
- Selection and provision of PPE for women in mining.
- Other risks identified by the Chief Inspector.
The mine's COP must reflect applicable official guidelines and the circumstances of the specific operation.
Competency, Training and Authorisation
Employers must ensure employees are competent for the work assigned to them and receive the necessary instruction, training and supervision.
Depending on the activity, this may include specific statutory appointments, certificates of competency, equipment authorisations and documented practical assessments.
Employee Safety Rights
Mine employees have statutory duties to take reasonable care, follow lawful safety instructions, use equipment appropriately and report unsafe conditions.
Under Section 23, employees have the right to leave a working place when circumstances arise that reasonably justify believing it poses a serious danger.
4. Ground Stability, Rock Falls and Quarry Faces
Underground Rock Fall Prevention
Underground mining may expose workers to loose rock, unstable hanging walls, geological discontinuities and rock bursts.
Appropriate controls include:
- Geological and geotechnical risk assessments.
- Examination of working places.
- Suitable rock support and reinforcement systems.
- Scaling or barring of loose material where appropriate.
- Ground movement monitoring.
- Safe access and withdrawal procedures.
- Competent supervision and worker training.
- Mandatory COPs addressing significant fall-of-ground risks.
Opencast Mines and Quarry Highwalls
Surface mines and quarries must manage the stability of excavated faces, benches, slopes and highwalls.
Important controls include:
- Geotechnically appropriate bench heights and slope designs.
- Monitoring cracks, rock movement and unstable faces.
- Safe working and exclusion zones.
- Restrictions on working beneath unstable faces.
- Controls against undercutting and unsupported overhangs.
- Safe drainage and stormwater management.
- Appropriate rockfall protection.
- Regular examinations and documented corrective action.
Stockpiles, Dumps and Tipping Areas
Material stockpiles, waste dumps and tipping areas create risks of edge collapse, equipment overturning and uncontrolled material movement.
Risk controls should address ground-bearing capacity, safe tipping positions, traffic routes, visibility, suitable edge protection and restrictions on pedestrian access.
A quarry's operating procedures must be based on its actual excavation geometry, geological conditions and machinery.
5. Mining Machinery and Equipment Safety
Trackless Mobile Machinery — Regulation 8.10
Trackless mobile machinery (TMM) includes qualifying self-propelled equipment used in mining or related operations.
Examples include loaders, haul trucks, excavators, drill rigs and underground utility vehicles.
The regulations require suitable controls for:
- Collisions between machines and pedestrians.
- Collisions between mobile machines.
- Vehicle runaway and loss of control.
- Inadequate braking systems.
- Operator visibility.
- Operator fatigue.
- Overturning and falling objects.
- Unsafe access and boarding.
- Mechanical maintenance.
- Unauthorised operation.
- Lockout and isolation.
- Pre-use inspection.
Where the regulations' significant-risk conditions apply, prescribed detection, warning and automatic intervention requirements must be met.
Collision-prevention measures are not limited to audible reversing alarms or high-visibility clothing.
Operator Competence and Pre-Use Checks
Machines must be operated by appropriately competent and authorised personnel.
Inspection procedures should address:
- Brakes.
- Steering.
- Lights and warning devices.
- Tyres and wheels.
- Fluid leaks.
- Restraints and protective structures.
- Fire protection.
- Operational safety devices.
Defects affecting safe operation must be reported and controlled before the equipment is used.
Conveyors, Crushers and Screening Equipment
Mineral processing and aggregate plants commonly contain moving belts, rollers, pulleys, crushers, screens and feeders.
Required safeguards and safe systems should address:
- Guarding of dangerous moving parts.
- Access restrictions.
- Emergency stopping arrangements.
- Safe isolation and lockout.
- Belt tracking and maintenance.
- Prevention of unintended startup.
- Safe clearing of blockages.
- Dust and noise controls.
- Safe conveyor inspection and repair.
Employees must not clean, clear, adjust or repair moving machinery in a manner that exposes them to uncontrolled mechanical hazards.
Shafts and Winding Installations
Underground mines with shafts, hoists and winding equipment are subject to specialist Chapter 8 requirements.
The revised 2025 regulations address matters including winding machinery design, brakes, inspections, ropes, conveyances, shaft signalling, operator competency and examination records.
These are specialist engineering compliance requirements and are not satisfied by ordinary PPE provision.
6. Blasting and Explosives Safety — Chapter 4
Drilling and blasting operations are common in underground mines, opencast mines and hard-rock quarries.
The explosives regulations establish requirements for the safe control, storage, transport, handling and use of explosives.
Blasting Responsibilities
Blasting operations must be supervised and performed by appropriately appointed competent persons.
Written procedures must address the applicable risks and the operational conditions.
These include:
- Explosives security and authorised access.
- Storage and transport.
- Drilling and charging arrangements.
- Misfires and unexploded charges.
- Blasting initiation and warnings.
- Exclusion zones.
- Protection against flyrock.
- Ground vibration and air-blast risks.
- Post-blast examination.
- Safe return to the blast area.
Protection of Surrounding Structures and Communities
Regulation 4.16 contains additional requirements for blasting within 500 metres horizontally of specified public buildings, thoroughfares, railway lines, power lines and other structures requiring protection.
Where the provision applies, blasting within this distance requires the prescribed risk assessment, application and written approval from the Principal Inspector of Mines.
The applicable mandatory COP dealing with ground vibration, air-blast, noise and flyrock must also be considered.
PPE During Drilling and Blasting
Relevant protection may include approved head, eye, hearing, foot, hand and respiratory protection selected for the task.
PPE alone cannot protect workers from uncontrolled flyrock, blast pressure or premature detonation. These hazards require engineered controls and strict blasting procedures.
7. Personal Protective Equipment Specifications for Mining
Statutory PPE Requirements — Section 6
Section 6 of the Mine Health and Safety Act requires mine employers to supply necessary health and safety equipment and facilities.
Employers must ensure:
- Suitable PPE is available in sufficient quantities.
- Required equipment remains serviceable and hygienic as far as reasonably practicable.
- Employees receive instruction on correct use, limitations and maintenance.
- Defective protection is addressed and replaced.
- Employees are not charged for legally required safety equipment.
PPE selection must follow workplace hazard identification and risk assessment.
Mining PPE Standards Reference
The following standards are commonly relevant to mining and quarrying procurement. Their applicability, latest editions and conformity requirements must be verified for the specific item and task.
PPE category | Relevant standard or specification | Protection purpose |
Industrial safety helmets | SANS 1397 or applicable SANS 50397 / EN 397 | Protection from appropriate head impact hazards |
Protective footwear | SANS 20345 / ISO 20345 | Protective toe caps and specified additional hazards |
High-visibility clothing | SANS 50471 / ISO 20471 | Visibility around vehicles and machinery |
Safety spectacles and goggles | SANS 1404 or applicable EN 166 | Eye impact, dust and splash protection |
Mechanical safety gloves | EN 388 or applicable equivalent | Abrasion, cuts, tears and puncture resistance |
Chemical protective gloves | EN ISO 374 series | Protection against specified chemical exposure |
Hearing protection | SANS 1451 or applicable EN 352 series | Control of hazardous noise exposure |
Particulate respirators | SANS 50149 / EN 149, as applicable | Filtering specified airborne particles |
Replaceable particulate filters | EN 143 or applicable equivalent | Particulate filtration in suitable respirator systems |
Chemical respiratory filters | EN 14387 or applicable equivalent | Suitable protection against specified gases or vapours |
Full-body safety harnesses | SANS 50361 / EN 361 | Fall-arrest system body support |
Flame-resistant protective clothing | EN ISO 11612 or appropriate task-specific standard | Protection against specified heat and flame hazards |
Welding protective clothing | EN ISO 11611 | Protection against specified welding hazards |
Underground escape breathing apparatus | SANS 1737 | Body-worn self-contained emergency escape protection |
Compliance distinction: These standards are technical references, not a single legally prescribed mining uniform. The mine's risk assessment, applicable regulations, mandatory COPs and approved site specifications determine which items and protection levels are required.
Protective Footwear
Mining footwear may need protection against falling rocks, sharp materials, heat, water, chemicals, slip hazards and uneven ground.
A footwear specification should identify the relevant protection classification and performance properties.
For example, not every SANS 20345 safety boot provides identical penetration, water or metatarsal protection.
Safety Helmets
Head protection should account for the impact hazards present and compatibility with lamps, face shields, hearing protection and retention systems.
Where chin straps or helmet accessories are required, they must be appropriate to the approved helmet configuration.
Eye and Face Protection
Drilling, cutting, grinding, crushing, chemicals and maintenance activities require eye or face protection matched to the relevant hazard.
Selection may include impact-rated spectacles, sealed goggles, splash protection, face shields and welding protection.
A face shield alone must not be assumed to replace primary eye protection.
Hand Protection
Mining gloves should be selected for the actual hazard.
Mechanical protection requirements differ from those associated with chemical handling, hot work, electrical operations and precision maintenance.
High-Visibility Workwear
Workers exposed to moving machinery, haul trucks and vehicle traffic may require high-visibility clothing selected according to site conditions.
Garment visibility class, reflectivity, fit and compatibility with other equipment are important considerations.
8. PPE for Women in Mining
South Africa issued an updated guideline for the mandatory Code of Practice on the selection and provision of PPE for women in mining in July 2023.
This addresses the long-standing problem of PPE that is technically certified but improperly fitted to female workers.
Procurement and safety programmes must consider:
- Appropriate size ranges.
- Correct anatomical and ergonomic fit.
- Footwear shapes and sizes.
- Properly fitted respirators.
- Protective overalls suited to the wearer.
- Harness and other safety-equipment fit.
- Comfort and practical functionality.
- Hygiene and sanitary considerations.
- Pregnancy-related and other individual occupational risk factors.
- Assessment of suitability, wearer feedback and timely replacement.
Oversized PPE is not an acceptable substitute for correctly fitted PPE.
Poorly fitting equipment may impair movement, reduce respiratory protection effectiveness, create entanglement hazards and introduce additional workplace risks.
Procurement systems should accommodate the required range of worker sizes and body shapes rather than relying on a single generic design.
9. Occupational Hygiene and Exposure Limits
Airborne Dust and Respirable Crystalline Silica
Mining operations may generate hazardous dust during drilling, blasting, loading, crushing, screening, grinding and vehicle movements.
Respirable crystalline silica is a major occupational health concern in hard-rock mining and quarrying.
Exposure may contribute to silicosis, other respiratory disease and associated long-term health risks.
Controls should prioritise:
- Wet drilling and cutting.
- Dust suppression systems.
- Local extraction and ventilation.
- Enclosed transfer points.
- Appropriate road wetting and maintenance.
- Dust-controlled plant design.
- Personal exposure monitoring.
- Suitable respiratory protective equipment.
- Medical surveillance where indicated.
Under the revised mining airborne-pollutant schedule published in March 2025, the occupational exposure limit for respirable crystalline silica in the form of quartz is 0.05 mg/m³, based on the applicable measurement conditions.
The same revised schedule also identifies occupational exposure limits for cristobalite and tridymite.
The complete current Schedule 22.9(2)(a) must be consulted for other substances, exposure qualifications and assessment requirements.
Noise Exposure
Drilling machinery, crushers, vibrating screens, compressors, heavy equipment and blasting create substantial occupational noise hazards.
The Department of Mineral and Petroleum Resources identifies an eight-hour occupational noise exposure limit of 85 dB(A).
Mining noise exposure classification also includes the 82–85 dB(A) exposure band.
Employers must apply the relevant occupational hygiene, exposure monitoring and medical surveillance requirements.
Effective controls include:
- Quieter equipment and processes.
- Acoustic enclosures.
- Equipment maintenance.
- Noise isolation and barriers.
- Appropriate hearing protection.
- Audiometric surveillance.
- Exposure records and employee training.
Hearing protection must provide suitable attenuation without unnecessarily preventing workers from hearing safety-critical communications and warning signals.
Heat and Thermal Stress
Underground temperatures, confined work environments, outdoor operations and strenuous physical activity may expose employees to heat stress.
Controls may include:
- Temperature and exposure monitoring.
- Ventilation.
- Adequate hydration.
- Work-rest arrangements.
- Appropriate protective clothing.
- Medical surveillance.
- Acclimatisation and heat-related illness response arrangements.
Thermal stress monitoring and statutory reporting must follow the applicable mining regulations and occupational hygiene requirements.
Diesel Exhaust and Hazardous Gases
Diesel-powered mining machinery may expose workers to exhaust contaminants.
Underground operations may also encounter hazardous gases or oxygen-deficient atmospheres.
Safe systems require suitable ventilation, monitoring, equipment maintenance and control of hazardous atmospheres.
Respiratory filters must not be used as substitutes for self-contained breathing apparatus in oxygen-deficient or immediately dangerous atmospheres.
10. Underground Mining Emergency Protection
Self-Contained Self-Rescuers — Chapter 16
The revised 2025 regulations require every person entering an underground mine to carry the prescribed body-worn self-contained self-rescuer (BWSCSR) complying with SANS 1737.
For surface operations, BWSCSR requirements apply to areas where the risk assessment identifies exposure to irrespirable atmospheres under Regulation 16.2.2.
The regulations also address:
- Individual allocation.
- Correct body-worn deployment.
- Employee training.
- Defective or obsolete units.
- Maintenance and testing.
- Equipment monitoring.
- Records and replacement.
A normal particulate respirator is not a self-contained self-rescuer.
Refuge Bays and Emergency Escape
Underground operations require suitable emergency escape arrangements and refuge facilities in accordance with applicable Chapter 16 provisions.
Emergency planning must account for mine layout, ventilation, communications, available escape routes, likely emergencies and rescue requirements.
11. Mine Rescue, Fire Safety and First Aid
Emergency Preparedness — Chapter 16
The mine must assess its ability to respond to relevant emergencies, including:
- Fires and explosions.
- Flooding.
- Chemical and biological releases.
- Hazardous gas incidents.
- Mechanical, electrical and processing emergencies.
- Seismic events.
- Falls of ground.
- Serious workplace injuries.
Underground Mine Rescue Teams
Chapter 16 contains requirements for mine rescue teams, their numbers, competence, equipment and availability.
The specific arrangements depend on the maximum number of people potentially underground, the operation and applicable prescribed arrangements.
Surface Mines and Quarries
Regulation 16.5, as amended in 2025, also includes requirements for surface fire responder teams at surface mining and mineral exploitation operations.
These provisions specify trained responders, minimum team availability, appropriate equipment and arrangements with a mines rescue service provider.
The regulations identify a minimum surface fire responder team of seven members trained at the mine, with at least five readily available for deployment.
Mine managers must verify and implement the full applicable requirements, including training, certification, equipment and service-provider arrangements.
First Aid and Medical Response
Mine emergency arrangements must provide suitable medical response capabilities, trained personnel, equipment and evacuation arrangements.
First-aid provision should be determined with reference to the current mining regulations, workplace risk and applicable emergency-care COP.
Mine employers must also meet the relevant accident reporting and investigation requirements.
12. Safe Quarrying and Aggregate Processing
Quarrying presents mining hazards on a scale that can be underestimated in smaller operations.
Important operating areas include:
Quarry Faces and Excavation Benches
Monitor slope stability, loose rock, overhangs, rock fractures and blasting effects.
Crushing and Screening Plants
Manage machinery guarding, isolation, dust extraction, noise, falls, access platforms and maintenance activities.
Loading and Haulage
Separate pedestrians from vehicles, control tipping areas and manage vehicle stability, roads, gradients and traffic flow.
Aggregate Stockpiles
Control stockpile collapse, engulfment, machinery rollover and uncontrolled material movement.
Water-Filled Excavations
Assess drowning risks, flooding, unstable ground and access to abandoned or flooded excavations.
Public and Environmental Protection
Manage boundary security, blasting impacts, dust emissions, water runoff, site traffic and other hazards potentially affecting neighbouring properties and communities.
Quarry operators must not assume that an operation is exempt from mining legislation because it is smaller than a conventional underground or opencast mine.
13. Mining Health and Safety Documentation
The following documentation may be required depending on the mine type, operational activities and applicable statutory duties:
- Mining right, permit or relevant mineral authorisation.
- Mine health and safety policy and management arrangements.
- Hazard identification and risk assessments.
- Applicable mandatory Codes of Practice.
- Statutory appointment records.
- Mine management and supervisor competency records.
- Employee training and induction records.
- Equipment operator authorisations.
- Occupational hygiene monitoring records.
- Medical surveillance records and relevant fitness determinations.
- PPE issue and replacement records.
- Equipment certification and inspection registers.
- Trackless mobile machine inspection and maintenance records.
- Conveyor and plant maintenance procedures.
- Explosives and blasting documentation where applicable.
- Geotechnical inspection and stability monitoring records.
- Mine plans and surveying records.
- Ventilation and gas-monitoring records where applicable.
- Emergency response and rescue arrangements.
- First-aid and emergency equipment inspection records.
- Incident reports, investigations and corrective action records.
- Employee health and safety consultation records.
- Legally required occupational hygiene and health returns.
Documents should be controlled, current, accessible to authorised personnel and traceable to the equipment, working area or workers concerned.
14. Mining PPE Procurement Requirements
Mine and quarry procurement departments should specify protective equipment against the risks identified for each job or operating area.
Minimum Information for a PPE Specification
A suitable procurement request should identify:
- The mine or quarry operation.
- Surface or underground working conditions.
- The specific task and hazards.
- The required protection category.
- The applicable SANS, ISO, EN or other specified standard.
- The required performance rating or class.
- Worker sizes and fit requirements.
- Compatibility with other safety equipment.
- Mine-specific operational or COP requirements.
- Certification or conformity evidence required.
- Inspection and maintenance instructions.
- Quantity and replacement requirements.
Verifying PPE Compliance
Before accepting equipment as compliant, procurement teams should verify the manufacturer, product model, relevant conformity documentation and performance specifications.
Where required, obtain appropriate test reports, certificates or declarations of conformity for the specific product.
Do not rely solely on generic descriptions such as "mine approved", "SABS quality" or "industrial grade".
A manufacturer's certificate or product marking does not establish that the item is suitable for every mining task.
15. Frequently Asked Questions
Does the Mine Health and Safety Act apply to quarries?
Yes. The Act's definition of minerals includes stone, sand, gravel and clay. Qualifying mineral extraction and processing operations fall within the mining health and safety framework.
Must mining employers provide PPE free of charge?
Yes. Section 6 requires employers to provide the necessary health and safety equipment, and Section 24 prevents employers from charging employees for required health and safety equipment and facilities.
Is a safety helmet mandatory for every person at every mine?
Head protection requirements depend on the hazards, legal requirements and the mine's applicable rules. Workers exposed to head injury risks must have suitable protection. A generic site rule may additionally require helmets in designated areas.
Are safety boots with steel toe caps sufficient for mining?
Not necessarily. Protective footwear must match the assessed hazards. Toe protection alone does not establish appropriate slip, penetration, water, heat, electrical or metatarsal protection.
Is a P2 dust mask suitable for all quarry dust?
No. Respiratory protection must be selected against measured or assessed exposure, contaminant properties, filter performance and fit requirements. Dust suppression and engineering controls remain essential.
Do all underground mine workers need self-rescuers?
Under the amended Chapter 16 provisions, body-worn self-contained self-rescuers complying with SANS 1737 are required for persons entering underground mines.
Must mining PPE be suitable for women?
Yes. Mining PPE selection must provide effective protection for the actual wearer. South Africa's 2023 mandatory COP guideline specifically addresses appropriate selection and provision of PPE for women in mining.
Can a quarry use the Construction Regulations instead of mining regulations?
Not as a general substitute. Where the operation falls under the MHSA, its mine health and safety obligations apply. Particular construction activities may require additional legal assessment, but they do not automatically replace mining law.
16. Official Government and Regulatory References
The following sources provide access to applicable mining legislation, gazetted regulations and official industry guidance.
Primary Legislation
- Mine Health and Safety Act 29 of 1996 — South African Government
- Mine Health and Safety Council — Updated Act and Regulations, January 2026 compilation
- Department of Mineral and Petroleum Resources — Mine Health and Safety Resources
- Mineral and Petroleum Resources Development Act — Government legislation search
Machinery and Operational Safety
- Trackless Mobile Machinery Regulations — Government
- Machinery and Equipment Amendments, 2025
- Explosives Regulations
- Guideline for Mandatory COP — Trackless Mobile Machines
Occupational Health and Emergency Preparedness
- Mining Occupational Hygiene — Department of Mineral and Petroleum Resources
- Revised Mine Airborne Pollutant Exposure Limits, 2025
- Rescue, First Aid and Emergency Response Amendments, 2025
- Mandatory COP Guideline — PPE for Women in Mining, 2023
- Mandatory COP Guideline — Minimum Standards of Fitness to Work on a Mine
Official Codes of Practice and Guidelines
Legislative update: The Mine Health and Safety Amendment Bill B10–2026 was introduced to Parliament in April 2026. Proposed amendments should not be treated as enacted requirements unless and until they are passed, assented to and brought into operation.
Mining and Quarrying Safety Equipment Support — Norsafe
Norsafe assists mining, quarrying and mineral-processing customers with PPE procurement based on their operational hazards, workplace requirements and applicable technical specifications.
For a more accurate PPE quotation, provide your mine's safety specification, the relevant work activities, required protection standards, sizes and quantities.
Our team can assist with protective equipment identification and procurement requirements. Mine health and safety risk assessments, statutory appointments, specialised engineering design and regulatory compliance approvals remain the responsibility of competent and appropriately authorised parties.
Norsafe — Workwear, PPE and Safety Equipment | Polokwane, Limpopo
Information reviewed: October 2026. This guide summarises principal mining and quarrying safety requirements and is not an exhaustive reproduction of legislation. Confirm the latest applicable regulations, gazetted amendments, mandatory Codes of Practice and technical standards before using it for formal compliance or tender specifications.
ONE CATALOGUE. ALL PRODUCTS.
Need PPE for this work?
Use the safety specification above to choose suitable protection. Product browsing and RFQs stay in Norsafe’s central catalogue.